C12142020 CHEVROLET Corvette

C1214 on 2020 CHEVROLET Corvette

ABS Inlet Valve Coil RF Circuit Failure

💬
3
Discussions
0%
Success Rate
👥
7
Owner Reports
Live Data

Last reported case: 1 years ago

Based on 3 owner reports, 3 from forums)

What is C1214?

C1214 indicates a failure in the right front ABS inlet valve coil circuit, which is part of the Electronic Brake Control Module (EBCM) system. This is a high-severity code that disables ABS and traction control, creating a safety risk, especially in slippery conditions. Based on owner reports, this frequently appears as a known EBCM issue in Chevrolet Corvettes, often triggered by electrical faults or module failures.

Common Causes:

  • EBCM (Electronic Brake Control Module) failure, which is a known issue in Chevrolet Corvettes according to multiple owner reports
  • Electrical circuit faults in the ABS inlet valve wiring or connections
  • Brake system modifications or non-stock components affecting the ABS operation

Symptoms:

  • ABS warning light illuminated on dashboard
  • Traction control system disabled
  • Front wheels locking up during braking, especially noticeable on track according to one owner
  • Single clunk noise during first brake application after direction changes
  • Excessive brake dust reported by some owners

View generic C1214 info →

🚗C1214 on 2020 CHEVROLET Corvette

This page focuses specifically on C1214 issues reported by 2020 CHEVROLET Corvette owners. The experiences and fixes below are from real owners of this exact vehicle.

Parts Often Involved:

z06 calipersbrake biasing

What Owners Say

Real experiences from 2020 CHEVROLET Corvette owners

7 reports
Fixed Itvia forum_reply
No C1214 has popped up since then. Quote: Originally Posted by USAZR1 Do you think base C6 calipers would have worked, on your particular application? https://www.corvetteforum.com/forums...ls-how-to.html Don't have a clue, unfortunately.
MetalMan2Jun 2024|Problem Fixed
View original
Fixed Itvia forum_reply
Quote: Originally Posted by USAZR1 Do you think base C6 calipers would have worked, on your particular application? https://www.corvetteforum.com/forums...ls-how-to.html Don't have a clue, unfortunately.
MetalMan2Jun 2024|Problem Fixed
View original
Experiencevia forum_reply
Did the LMC5 mod today to get rid of the "pull key out and wait 10 seconds" error every time I start up the car. Installation was easy but as I was out test driving the C5, the C1214 code popped up... shoot me.
OneBadBananaJan 2021
View original
Experiencevia forum_reply
Quote: Originally Posted by MetalMan2 On both of the last 2 drives, my 2001Z has thrown C1214 HC.Yay, lol. It's happening part-way through a drive, randomly.
jonofmacJun 2024
View original
Experiencevia forum_reply
I was chatting with @jonofmac and he mentioned that C1214 actually caused a bit of a crash on his 2001Z ! So thinking I should address this sooner than later...
MetalMan2Jun 2024
View original
Experiencevia forum_reply
Haven't experienced anything negative from it... yet. I was chatting with @jonofmac and he mentioned that C1214 actually caused a bit of a crash on his 2001Z !
MetalMan2Jun 2024
View original
Experiencevia forum_reply
Installation was easy but as I was out test driving the C5, the C1214 code popped up... shoot me.
OneBadBananaJan 2021
View original

These are real experiences shared by 2020 CHEVROLET Corvette owners on automotive forums and communities. Results may vary based on vehicle condition and repair quality.

About This Data

This page aggregates 3 discussions about C1214 from 2020 CHEVROLET Corvette owners across automotive communities.

Success rate (0%) is calculated from posts where owners confirmed whether their fix resolved the issue.

Last updated: 6/26/2024