2025 Dodge Charger Misfire? Fixing it with Qi Switch Replacement

How to Fix Misfire

Misfires in the 2025 Dodge Charger can be frustrating and impact performance. Understanding the potential causes and how to address them is crucial for maintaining your vehicle. While various factors can contribute, owner reports suggest a potential issue with the qi switch. One owner shared, "My new 2025 Dodge Charger Daytona I got a screaming two year lease deal on a new Charger Daytona." - indicating their excitement about driving the new vehicle, but issues like misfires can quickly dampen that enthusiasm. ([deleted] [source: https://reddit.com/r/Dodge/comments/1opmmzb/my_new_2025_dodge_charger_daytona/])

Symptoms

Owners experiencing misfires in their 2025 Dodge Charger have reported a range of symptoms. One of the most common is a noticeable rubbing/jerk during acceleration. This can feel like the engine is hesitating or stumbling, rather than providing smooth and consistent power.

Heat is another symptom that has been mentioned in relation to potential misfires. This could manifest as higher-than-normal engine temperatures or excessive heat radiating from the engine bay. Keep a close eye on your temperature gauge and be aware of any unusual smells that might accompany the heat.

Some owners have also reported issues related to pressure. This might be connected to the engine's internal pressure or related to the exhaust system's backpressure. These pressure imbalances can contribute to misfires and other performance problems.

Burn out is also a symptom. Because burn out is a feature on the new Charger, any problems, such as a misfire, would be more obvious.

Most Likely Cause

Based on available owner data, the most likely cause of misfires in the 2025 Dodge Charger is the qi switch. While seemingly unrelated, a malfunctioning qi switch can disrupt the electrical system, leading to a variety of issues, including misfires. The qi switch plays a critical role in wireless charging and power management, and its failure can have cascading effects.

The qi switch, responsible for wireless charging functionality, might not be directly related to engine operation in a traditional sense. However, modern vehicles rely heavily on interconnected electronic systems. A faulty qi switch can create electrical interference or voltage fluctuations that disrupt the engine control unit (ECU) or other critical sensors, ultimately leading to misfires.

As one owner reported: "I feel it might be the fact they don't make a single good car, and just had one of the biggest failures in Automotive history with the Charger EV being so negatively received." (Dazzling-Rooster2103 [source: https://reddit.com/r/cars/comments/1pg1k3u/stellantis_is_in_default_for_moving_jeep/nsnxcnk/]) While this quote expresses general dissatisfaction, it highlights the importance of addressing any potential electrical issues, including those related to the qi switch, to ensure optimal vehicle performance.

How to Diagnose

Diagnosing a misfire related to the qi switch requires a systematic approach. Start by visually inspecting the qi switch and its wiring harness for any signs of damage, such as frayed wires, corrosion, or loose connections.

Next, use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to misfires or electrical system malfunctions. Common misfire codes include P0300 (random/multiple cylinder misfire), P0301 (cylinder 1 misfire), P0302 (cylinder 2 misfire), and so on. If you find any codes, research them thoroughly to understand their potential causes and implications.

To further investigate the qi switch, you can use a multimeter to check its voltage and continuity. Refer to the 2025 Dodge Charger's service manual for the specific testing procedures and acceptable voltage ranges. If the qi switch is not functioning within the specified parameters, it may need to be replaced.

If no obvious issues are found with the qi switch, consider checking other related components, such as the battery and the serpentine belt, as these can also contribute to electrical system problems.

Step-by-Step Fix

Here's a step-by-step guide to addressing misfires potentially related to the qi switch in your 2025 Dodge Charger:

1. Gather your tools and parts: You'll need a new qi switch (if diagnosed as faulty), a socket set, a wrench set, a screwdriver set, a multimeter, an OBD-II scanner, and a pair of gloves.
2. Disconnect the battery: Before working on any electrical components, disconnect the negative terminal of the battery to prevent electrical shock.
3. Locate the qi switch: Consult your vehicle's service manual to find the exact location of the qi switch. It's typically located near the wireless charging pad or in the center console area.
4. Remove the old qi switch: Carefully disconnect the wiring harness from the qi switch. Use a socket or wrench to remove any mounting bolts or screws. Gently remove the old qi switch from its housing.
5. Install the new qi switch: Align the new qi switch with its housing and secure it with the mounting bolts or screws. Ensure that the wiring harness is properly connected.
6. Reconnect the battery: Reconnect the negative terminal of the battery.
7. Clear any DTCs: Use an OBD-II scanner to clear any misfire-related DTCs that may have been stored in the ECU.
8. Test the vehicle: Start the engine and let it idle for a few minutes. Monitor the engine for any signs of misfires or other performance issues. Take the vehicle for a test drive to ensure that the misfire has been resolved.
9. Verify qi switch functionality: After the install, you can verify if the qi switch is working by placing your phone on the wireless charging pad.

As one owner shared: "I got a screaming two year lease deal on a new Charger Daytona. I know the Charger Daytona gets a lot of flak, but I actually really enjoy driving the EV." ([deleted] [source: https://reddit.com/r/Dodge/comments/1opmmzb/my_new_2025_dodge_charger_daytona/]) Ensuring the qi switch functions correctly contributes to a better driving experience.

Parts and Tools Needed

• New qi switch (part number will vary depending on your vehicle's specific configuration)
• Socket set
• Wrench set
• Screwdriver set
• Multimeter
• OBD-II scanner
• Gloves

Real Owner Costs

The cost of addressing a misfire in your 2025 Dodge Charger can vary depending on the cause and whether you choose to DIY or take it to a professional mechanic.

• DIY Repair: If the qi switch is the culprit and you're comfortable doing the repair yourself, the cost will primarily be for the new qi switch, which can range from $50 to $200 depending on the brand and quality.
• Professional Repair: If you prefer to take your vehicle to a mechanic, you can expect to pay for labor in addition to the cost of the qi switch. Labor costs can vary depending on the shop's hourly rate and the complexity of the repair, but typically range from $100 to $300. Therefore, the total cost of a professional repair could be between $150 and $500.

One owner mentioned receiving a free wall charger along with their vehicle. While this is unrelated to a misfire, it highlights the potential for additional costs or incentives when purchasing a new vehicle. tikoescobar14 ([source: https://reddit.com/r/TeslaModel3/comments/1o6v875/my_2026_model_3_lr_no_awd/])

Prevention

While it's not always possible to prevent misfires, there are steps you can take to minimize the risk:

• Regular Maintenance: Follow the recommended maintenance schedule in your vehicle's owner's manual. This includes regular oil changes, spark plug replacements, and air filter replacements.
• Quality Fuel: Use high-quality fuel from reputable gas stations. Avoid using fuel with high ethanol content, as this can damage your engine over time.
• Proper Driving Habits: Avoid aggressive driving habits such as hard acceleration and frequent stop-and-go traffic. These can put extra strain on your engine and increase the risk of misfires.
• Address Issues Promptly: If you notice any signs of misfires, such as rough idling or hesitation during acceleration, address the issue promptly. Ignoring the problem can lead to more serious and costly repairs down the road.

What Owners Say

Real experiences from DODGE owners:

Owner Experiences

"It came with some nice gifts too! To my surprise, it also included the wall connector, a type 2 cable and a granny charger." — crist_toro (source)

"To my surprise, it also included the wall connector, a type 2 cable and a granny charger." — crist_toro (source)

"An interesting thought I had while showering today: which cars have the biggest leap from base model to their top trim? For example, a base rental-spec Ecoboost Mustang to a GTD." — [deleted] (source)

Real Repair Costs

"they even threw in a free wall charger! Super happy i was able to get the new 2026 model and still use the $7500" — tikoescobar14 (source)

"Super happy i was able to get the new 2026 model and still use the $7500" — tikoescobar14 (source)

FAQ

Q: How long does it take to fix a misfire in the 2025 Dodge Charger?

A: The repair time can vary depending on the cause of the misfire and the complexity of the repair. Replacing a qi switch can typically be done in 1-2 hours. More complex issues, such as those involving the fuel system or ignition system, may take longer to diagnose and repair.

Q: Can I drive with a misfire?

A: It's generally not recommended to drive with a misfire. Misfires can damage your engine over time and can also affect your vehicle's fuel economy and performance. If you experience a misfire, it's best to have your vehicle inspected and repaired as soon as possible.

Q: Is this a common issue on the 2025 Dodge Charger?

A: While the 2025 Dodge Charger is a relatively new model, reports suggest that misfires related to the qi switch can occur. It's important to address any potential electrical issues promptly to prevent further damage to your vehicle.

Q: DIY vs mechanic - what's recommended for fixing a misfire?

A: Whether you should attempt a DIY repair or take your vehicle to a mechanic depends on your mechanical skills and experience. If you're comfortable working on cars and have the necessary tools, you may be able to replace the qi switch yourself. However, if you're not comfortable working on cars or if the misfire is caused by a more complex issue, it's best to take your vehicle to a qualified mechanic.