Live Data
Last reported case: 1 years ago
Based on 4 owner reports, 4 from forums)
🚗P2647 on 2020 HONDA Accord
This page focuses specifically on P2647 issues reported by 2020 HONDA Accord owners. The experiences and fixes below are from real owners of this exact vehicle.
Symptoms Reported by 2020 HONDA Accord Owners:
crud speckles
Parts Often Involved:
connectionsensor
What Owners Say
Real experiences from 2020 HONDA Accord owners
Experiencevia forum_reply
“I saw your post and am strongly considering changing that sensor like you did, but you were throwing P2647 code and I'm throwing P2646. My car is in limp mode like yours where anything much over 2500 RPM the engine stalls till the rpm drop back down to around 2500.”View original
Experiencevia forum_reply
“My car is in limp mode like yours where anything much over 2500 RPM the engine stalls till the rpm drop back down to around 2500. I can still drive it but I have to accelerate very slowly.”View original
Experiencevia forum_post
“I checked the sensor and it had some white crud speckles on it so I cleaned it. Put some grease over the connection to seal better because I heard of water moisture getting into it.”View original
Experiencevia forum_post
“Put some grease over the connection to seal better because I heard of water moisture getting into it. Why does this code keep coming back this Is ridiculous.”View original
These are real experiences shared by 2020 HONDA Accord owners on automotive forums and communities. Results may vary based on vehicle condition and repair quality.
About This Data
This page aggregates 4 discussions about P2647 from 2020 HONDA Accord owners across automotive communities.
Success rate (0%) is calculated from posts where owners confirmed whether their fix resolved the issue.
Last updated: 4/10/2024